1
/
of
4
Uploader
Case W8, W9, W9A, W10, W12 Loader Service Manual Workshop Guide
Case W8, W9, W9A, W10, W12 Loader Service Manual Workshop Guide
Regular price
$58.50 USD
Regular price
Sale price
$58.50 USD
Taxes included.
Shipping calculated at checkout.
Quantity
.
In Stock
Couldn't load pickup availability
Format : PDF
SUPPLIED AS DOWNLOADABLE LINK
Manual Included:
•
Service Manual:
572 Pages & 921 Pages
Specifications:
•
Brand:
Case
•
Model:
W8, W9, W10 and W9, W9A, W10, W12
•
Type:
Loader
•
Manuals:
Service Manual
•
Publication Numbers:
9-99965R0
•
Language:
English
•
Format:
PDF
Description
Table of Contents
General
Engines
Fuel System
Hydraulics
Steering
Power Train
Brakes
Electric
Mounted Equipment
Manual Extract Introduction Hydraulic Pump
General
The 25X Series Hydraulic pump used on the Unit Loaders is a flange mounted, gear type, fixed displacement pump, mounted to and driven by the converter. The hydraulic pump operates continuously whenever the Loader engine is running, drawing filtered hydraulic oil from the reservoir and circulating the oil through the system, the return filter and back into the reservoir.
Pump Body
The hydraulic pump body is cast in three sections for ease in disassembly, cleaning, inspection and servicing. The pump body is cored and drilled for installation of "0" rings, oil seals, bearings and check valves. The three sections of the pump body are held together by four caps crews to form an oil tight housing for the pump gears.
Pump Gears
Two gears are contained in the pump assembly, a drive gear and a driven gear. As the gears of the hydraulic pump revolve, the hydraulic oil drawn from the reservoir is trapped between the gear teeth and forced from the inlet, or suction, side of the pump through the small openings between the gear teeth and pump body, to the outlet, or pressure, side of the pump. The hydraulic oil is prevented from returning to the inlet side of the pump by the close mesh of the pump gears and the small clearance between the gears, pump body and the pump cover. The both gears are a matched set, therefore, both gears must be replaced if replacement is ever necessary.
SUPPLIED AS DOWNLOADABLE LINK
Manual Included:
•
Service Manual:
572 Pages & 921 Pages
Specifications:
•
Brand:
Case
•
Model:
W8, W9, W10 and W9, W9A, W10, W12
•
Type:
Loader
•
Manuals:
Service Manual
•
Publication Numbers:
9-99965R0
•
Language:
English
•
Format:
Description
Table of Contents
General
Engines
Fuel System
Hydraulics
Steering
Power Train
Brakes
Electric
Mounted Equipment
Manual Extract Introduction Hydraulic Pump
General
The 25X Series Hydraulic pump used on the Unit Loaders is a flange mounted, gear type, fixed displacement pump, mounted to and driven by the converter. The hydraulic pump operates continuously whenever the Loader engine is running, drawing filtered hydraulic oil from the reservoir and circulating the oil through the system, the return filter and back into the reservoir.
Pump Body
The hydraulic pump body is cast in three sections for ease in disassembly, cleaning, inspection and servicing. The pump body is cored and drilled for installation of "0" rings, oil seals, bearings and check valves. The three sections of the pump body are held together by four caps crews to form an oil tight housing for the pump gears.
Pump Gears
Two gears are contained in the pump assembly, a drive gear and a driven gear. As the gears of the hydraulic pump revolve, the hydraulic oil drawn from the reservoir is trapped between the gear teeth and forced from the inlet, or suction, side of the pump through the small openings between the gear teeth and pump body, to the outlet, or pressure, side of the pump. The hydraulic oil is prevented from returning to the inlet side of the pump by the close mesh of the pump gears and the small clearance between the gears, pump body and the pump cover. The both gears are a matched set, therefore, both gears must be replaced if replacement is ever necessary.
Share
