1
/
of
4
Uploader
Case CX60C Mini Excavator Service Manual Workshop Guide
Case CX60C Mini Excavator Service Manual Workshop Guide
Regular price
$61.50 USD
Regular price
Sale price
$61.50 USD
Taxes included.
Shipping calculated at checkout.
Quantity
.
In Stock
Couldn't load pickup availability
Format : PDF
SUPPLIED AS DOWNLOADABLE LINK
Manual Included:
•
Service Manual:
1911 pages
Specifications:
•
Brand:
New Holland
•
Model:
CX60C
•
Type:
Mini Excavator
•
Manuals:
Service Manual
•
Publication Numbers:
51452136 (Jul 2018)
•
Language:
English
•
Format:
PDF
Description
Table Contents
Content
Introduction
Engine
Hydraulics System
Frames and Ballasting
Tracks and Track Suspension
Cab Climate Control
Booms, dippers and buckets
Dozer Blade and Arm
Platform, cab, bodywork and decals
Electrical Schematic
Hydraulic Schematic
Manual Extract: Hydraulic systems – Service instruction – Releasing pressure
1. Place the machine on flat, level ground, lower the attachment to the ground, and stop the engine.
2. Switch the starter key to the ON position.
3. Put the safety lock lever in UNLOCK position (forward position).
4. Operate the control levers from right–hand to left-hand and front to rear a dozen times approximately.
5. Operate the travel levers from front to rear a dozen times approximately.
6. Open the refueling door located on the top of the rear door to access the hydraulic oil tank breather.
7. Loosen the cap (1) of the hydraulic oil tank and push the top of the air breather (2) to relieve the pressure.
NOTE: this procedure does not completely release the pressure, so when operate on the hydraulic system, loosen the connections slowly and do not stand in the direction where the oil drains out.
SUPPLIED AS DOWNLOADABLE LINK
Manual Included:
•
Service Manual:
1911 pages
Specifications:
•
Brand:
New Holland
•
Model:
CX60C
•
Type:
Mini Excavator
•
Manuals:
Service Manual
•
Publication Numbers:
51452136 (Jul 2018)
•
Language:
English
•
Format:
Description
Table Contents
Content
Introduction
Engine
Hydraulics System
Frames and Ballasting
Tracks and Track Suspension
Cab Climate Control
Booms, dippers and buckets
Dozer Blade and Arm
Platform, cab, bodywork and decals
Electrical Schematic
Hydraulic Schematic
Manual Extract: Hydraulic systems – Service instruction – Releasing pressure
1. Place the machine on flat, level ground, lower the attachment to the ground, and stop the engine.
2. Switch the starter key to the ON position.
3. Put the safety lock lever in UNLOCK position (forward position).
4. Operate the control levers from right–hand to left-hand and front to rear a dozen times approximately.
5. Operate the travel levers from front to rear a dozen times approximately.
6. Open the refueling door located on the top of the rear door to access the hydraulic oil tank breather.
7. Loosen the cap (1) of the hydraulic oil tank and push the top of the air breather (2) to relieve the pressure.
NOTE: this procedure does not completely release the pressure, so when operate on the hydraulic system, loosen the connections slowly and do not stand in the direction where the oil drains out.
Share
