1
/
of
4
Uploader
Case 2470, 2670 Tractor Service Manual Workshop Guide
Case 2470, 2670 Tractor Service Manual Workshop Guide
Regular price
$60.00 USD
Regular price
Sale price
$60.00 USD
Taxes included.
Shipping calculated at checkout.
Quantity
.
In Stock
Couldn't load pickup availability
Format : PDF
SUPPLIED AS DOWNLOADABLE LINK
Manual Included:
•
Service Manual:
1425 pages
Specifications:
•
Brand:
New Holland
•
Model:
2470, 2670
•
Type:
Tractor
•
Manuals:
Service Manual
•
Publication Numbers:
9-78399 (Jul 1981)
•
Language:
English
•
Format:
PDF
Description
Table of Content (
Service Manual)
General
Engine
Fuel System
Electrical
Steering
Power Train
Brakes
Hydraulics System
Chassis and Accessories
Manual Extract: Lowering Speed Regulator Valve
To properly adjust the lowering speed regulator valve, attach an implement to the 3 PT.
Hitch and start the tractor. Then proceed as follows.
1. Raise the implement to the full raise position, then lower it by moving the control lever forward.
2. Observe the implement as it is lowered. If the implement drops too fast, and there is danger of breakage or damage, turn the regulator valve (located on the hitch control valve body) clockwise 1/2 turn.
3. Repeat Steps 1 and 2 until the rate of descent is satisfactory. NOTE: Never turn the regulator valve more than 1/2 turn at a time.
4. If the implement lowers too slowly, turn the regulator valve counter-clockwise 1/2 turn at a time.
SUPPLIED AS DOWNLOADABLE LINK
Manual Included:
•
Service Manual:
1425 pages
Specifications:
•
Brand:
New Holland
•
Model:
2470, 2670
•
Type:
Tractor
•
Manuals:
Service Manual
•
Publication Numbers:
9-78399 (Jul 1981)
•
Language:
English
•
Format:
Description
Table of Content (
Service Manual)
General
Engine
Fuel System
Electrical
Steering
Power Train
Brakes
Hydraulics System
Chassis and Accessories
Manual Extract: Lowering Speed Regulator Valve
To properly adjust the lowering speed regulator valve, attach an implement to the 3 PT.
Hitch and start the tractor. Then proceed as follows.
1. Raise the implement to the full raise position, then lower it by moving the control lever forward.
2. Observe the implement as it is lowered. If the implement drops too fast, and there is danger of breakage or damage, turn the regulator valve (located on the hitch control valve body) clockwise 1/2 turn.
3. Repeat Steps 1 and 2 until the rate of descent is satisfactory. NOTE: Never turn the regulator valve more than 1/2 turn at a time.
4. If the implement lowers too slowly, turn the regulator valve counter-clockwise 1/2 turn at a time.
Share
