{"product_id":"john-deere-3215a-3215b-3225b-3235a-and-3235b-mower-technical-manual-workshop-guide","title":"John Deere 3215A, 3215B, 3225B, 3235A and 3235B Mower Technical Manual Workshop Guide","description":"Format : PDF\u003cbr\u003eSUPPLIED AS DOWNLOADABLE LINK\u003cbr\u003e\u003cbr\u003eManual Included:\u003cbr\u003eTechnical Manual:\u003cbr\u003e492 Pages\u003cbr\u003eSpecifications:\u003cbr\u003eBrand:\u003cbr\u003eJohn Deere\u003cbr\u003eModel:\u003cbr\u003e3215, 3215A, 3215B, 3225B, 3235, 3235A ,3235B\u003cbr\u003eType:\u003cbr\u003eLightweight Fairway Mower\u003cbr\u003eManuals:\u003cbr\u003eTechnical Manual\u003cbr\u003ePublication Numbers:\u003cbr\u003eTM1534\u003cbr\u003eLanguage:\u003cbr\u003eEnglish\u003cbr\u003eFormat:\u003cbr\u003ePDF\u003cbr\u003e\u003cbr\u003eDescription\u003cbr\u003eTable of Contents (Technical Manual TM1534)\u003cbr\u003eSafety\u003cbr\u003eSpecifications and Information\u003cbr\u003eEngine – 3TNE75-RJF\u003cbr\u003eEngine – 3TNE78-JFM\u003cbr\u003eElectrical\u003cbr\u003eGear Power Train\u003cbr\u003eSteering and Brakes\u003cbr\u003eHydraulics\u003cbr\u003eMiscellaneous\u003cbr\u003eThe listing is for :\u003cbr\u003eJohn Deere 3215 manual,\u003cbr\u003eJohn Deere 3215A manual,\u003cbr\u003eJohn Deere 3215B manual,\u003cbr\u003eJohn Deere 3225B manual,\u003cbr\u003eJohn Deere 3235 manual,\u003cbr\u003eJohn Deere 3235A manual and\u003cbr\u003eJohn Deere 3235B manual\u003cbr\u003eThese are concise service guides for a specific machine and are on-the-job guides containing only the vital information needed by a technician and includes repair and maintenance information, detailed description of service and troubleshoot procedures, installation instructions, special instructions, other additional information.\u003cbr\u003eThis manual includes illustrations like pictures and diagrams which you can help you determine the installation location spare parts, etc.\u003cbr\u003eDiagnostics of the Steering Wheel\u003cbr\u003eSteering System Troubleshooting\u003cbr\u003eSymptom: Steering Wanders\u003cbr\u003e(1) Are tires of proper type and inflated to proper pressure\u003cbr\u003eYes – Go to step (2).\u003cbr\u003eNo – Replace tire with tires of proper type. Inflate tire(s) to proper pressure.\u003cbr\u003e(2) Is hydraulic system free of air Hydraulic fluid not aerated\u003cbr\u003eYes – Go to step (3).\u003cbr\u003eNo – Purge air from system. Check suction line to charge pump for air leaks.\u003cbr\u003e(3) Are the hydraulic fittings tight, preventing fluid loss\u003cbr\u003eYes – Go to step (4).\u003cbr\u003eNo – Tighten hydraulic fittings.\u003cbr\u003e(4) Are the steering cylinder ball joints in good condition, not worn\u003cbr\u003eYes – Go to step (5).\u003cbr\u003eNo – Replace parts as needed.\u003cbr\u003e(5) Is the steering linkage in good condition, not damaged or worn\u003cbr\u003eYes – Go to step (6).\u003cbr\u003eNo – Repair or replace parts as necessary.\u003cbr\u003e(6) Perform steering system leakage test. See Test Steering System Leakage on page 370. Is test within specifications\u003cbr\u003eNo – Perform steering valve leakage test. See Test Steering Control Unit (SCU) Leakage on page 370.\u003cbr\u003eFollow results of test.\u003cbr\u003eInstall Rear Wheel Motor – Four-Wheel Drive Only\u003cbr\u003e1. Place hydrostatic motor in rear axle housing.\u003cbr\u003e2. Position motor so the fittings on the backplate of the motor face rear of the machine.\u003cbr\u003e3. Install four bolts through motor mounting flange and into rear axle housing. Tighten to specifications.\u003cbr\u003e4. Install hydraulic lines on motor.\u003cbr\u003e5. Place disk on motor shaft and install nut. Use pipe wrench to keep disk from turning if not using air tools.\u003cbr\u003eTighten to specifications.\u003cbr\u003e6. Install wheel and tire assembly.\u003cbr\u003e7. Start machine and operate motor to determine if motor rotates in the proper direction.\u003cbr\u003eIf motor rotates in wrong direction, the hydraulic lines are reversed or timing procedure of the motor is incorrect. See Motor Assembly for proper timing procedure.\u003cbr\u003eSpecifications\u003cbr\u003eRear Axle Housing Bolt Torque (4 used) . 140 Nm (105\u003cbr\u003elb-ft)\u003cbr\u003eDisc Torque. . . . . . . . . . . . . . . . . . . . . 190 Nm (140 lb-ft)","brand":"Uploader","offers":[{"title":"Default Title","offer_id":53594855014731,"sku":null,"price":52.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0978\/2519\/4315\/files\/1-196_d98719aa-2ecc-4244-9a04-dc948c1190ba.png?v=1760379960","url":"https:\/\/manualbull.com\/products\/john-deere-3215a-3215b-3225b-3235a-and-3235b-mower-technical-manual-workshop-guide","provider":"ManualBull","version":"1.0","type":"link"}