{"product_id":"challenger-mt835b-mt845b-mt855b-mt865b-mt875b-tractor-service-manual-workshop-guide","title":"Challenger MT835B, MT845B, MT855B, MT865B, MT875B Tractor Service Manual Workshop Guide","description":"Format : PDF\u003cbr\u003eSUPPLIED AS DOWNLOADABLE LINK\u003cbr\u003e\u003cbr\u003eChallenger MT835B, MT845B, MT855B, MT865B, MT875B Tractor Workshop Manual : 2643 Pages\u003cbr\u003eFormat: PDF\u003cbr\u003eBook Number: 79023768\u003cbr\u003eEnglish\u003cbr\u003eIssued October 2005\u003cbr\u003e\u003cbr\u003eDescription\u003cbr\u003eChallenger MT835B, MT845B, MT855B, MT865B, MT875B Tractor Service Manual\u003cbr\u003eManual for:\u003cbr\u003eAGCO Challenger\u003cbr\u003eMT800B Series Tractor\u003cbr\u003eFormat: PDF\u003cbr\u003eBook Number: 79023768\u003cbr\u003eEnglish\u003cbr\u003eIssued October 2005\u003cbr\u003eChallenger MT835B, MT845B, MT855B, MT865B, MT875B Tractor Workshop Manual : 2643 Pages\u003cbr\u003eMT800B Series Manual TABLE OF CONTENTS\u003cbr\u003eIntroduction\u003cbr\u003eEngine\u003cbr\u003eEngine Auxiliary\u003cbr\u003ePowertrain System Operation\u003cbr\u003ePowertrain Disassembly And Assembly\u003cbr\u003eSteering And Brake System\u003cbr\u003eUndercarriage\u003cbr\u003eHydraulic And Three Point Hitch Testing And Adjusting\u003cbr\u003eHydraulic Schematic\u003cbr\u003eElectrical Schematics\u003cbr\u003eTractor Management System Center (Tmc)\u003cbr\u003eAuto-guide Systems Operation\u003cbr\u003eCab Heating And Air Conditioning\u003cbr\u003eComponent Specifications\u003cbr\u003eComponent Disassembly And Assembly\u003cbr\u003eTroubleshooting\u003cbr\u003eMT835B, MT845B, MT855B, MT865B, MT875B Manual Extract\u003cbr\u003eAdjusting Belt Alignment\u003cbr\u003eIntroduction\u003cbr\u003eFIG. 318: A drawing of the right side of the undercarriage is shown.\u003cbr\u003eBy adjusting the bolt (3) and the corresponding bolt on the opposite side of the lever (4), you can adjust the alignment of the guide blocks to the midwheels.\u003cbr\u003eDimension (B) and the corresponding dimension on the other side of the lever (4) will determine the alignment of the guide blocks to the midwheels.\u003cbr\u003eWhen dimension (B) is smaller, the guide blocks will track closer to the outside midwheels. When dimension (B) is larger, the guide blocks will track closer to the inside midwheels.\u003cbr\u003eProcedure to Adjust the Belt Alignment Use the following steps to cause the guide blocks to ride closer to the outside midwheels: NOTE: Do not turn the adjusting bolts by more than 1\/4 turn.\u003cbr\u003e1. Move the tractor to a smooth horizontal location.\u003cbr\u003eMove away from working tractors and personnel.\u003cbr\u003eLower implements and lower the three-point hitch to the ground.\u003cbr\u003e2. Move the transmission control lever to the PARK position.\u003cbr\u003e3. Turn off the engine.\u003cbr\u003eFIG. 319: Photo of the right side of the undercarriage.\u003cbr\u003e4. Remove the bolt (5).\u003cbr\u003e5. Remove the lock plate (6).\u003cbr\u003e6. Remove the corresponding small bolt and the lock plate on the opposite side of the frame.\u003cbr\u003e7. Loosen the corresponding large bolt on the other side of the frame by 1\/4 turn. (Turn the bolt counterclockwise.)\u003cbr\u003e8. Tighten the bolt (3) to a torque of 200 N∙m (150 lb ft).\u003cbr\u003e9. Install the lock plate (6) and the bolt (5).\u003cbr\u003e10. Install the corresponding lock plate and the small bolt on the other side of the frame.\u003cbr\u003eUse the following steps to cause the guide blocks to ride closer to the inside midwheels: NOTE: Do not turn the adjusting bolts by more than 1\/4 turn.\u003cbr\u003e11. Remove lock plate (6) and bolt (5).\u003cbr\u003e12. Loosen bolt (3) by 1\/4 turn. (Turn the bolt counterclockwise.)\u003cbr\u003e13. Remove the corresponding small bolt and the lock plate from the other side of the frame.\u003cbr\u003e14. Tighten the corresponding bolt on the other side of the frame to a torque of 200 N∙m (150 lb ft).\u003cbr\u003e15. Install the lock plate and the small bolt on the other side of the frame.\u003cbr\u003e16. Install lock plate (6) and bolt (5).\u003cbr\u003e17. Check the belt alignment again.\u003cbr\u003eReference: Refer to Checking Belt Alignment in this section.\u003cbr\u003e18. Repeat Step 4 through Step 16 until the belt alignment is correct.","brand":"Uploader","offers":[{"title":"Default Title","offer_id":53593162449227,"sku":null,"price":64.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0978\/2519\/4315\/files\/1-2_7f9b99d4-515a-461b-800e-e0407fd525d4.png?v=1760372532","url":"https:\/\/manualbull.com\/products\/challenger-mt835b-mt845b-mt855b-mt865b-mt875b-tractor-service-manual-workshop-guide","provider":"ManualBull","version":"1.0","type":"link"}